TLFP Flexible Elements are designed to provide longer lasting, maintenance free, life even in the most chemically aggressive industrial environments. It consists solely of PTFE resins and is unaffected by hydrofluoric gases at temperatures up to 400ºF.

M12 Flexible Elements are designed to withstand a maximum continuous operating temperature (MCOT) of 600ºF without additional cavity insulation. It incorporates a multi-directional PTFE corrosion barrier that provides a non-porous, crack free surface.

K12 Flexible Elements are flouropolymer coated fiberglass fabric with PTFE laminated film on one side. It also incorporates a multi-directional, non-porous, zero porosity, PTFE corrosion barrier. It is engineered for wet/dry service and severe chemical and temperature exposure.

KLF12 Flexible Elements are made of multi-direction PTFE material that is capable of resisting stress cracking and severe temperature fluctuations. It has a maximum continuous operating temperature (MCOT) of 1000ºF are made of PTFE coated.

KLFC Flexible Elements are designed to withstand a maximum continuous operating temperature (MCOT) of 2000ºF without additional cavity insulation. It consists of a load bearing PTFE coated fiberglass fabric, a gas side multi-directional PTFE corrosion barrier, an inner 1/2” non-woven fiberglass thermal barrier and a ceramic fiber blanket supported by an outside layer of silica fiber. A vapor barrier and wire mesh are optional.